 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com 9 9 - 124 amplifiers - linear & power - smt hmc452st89 / 452st89e ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz v02.0710 general description features functional diagram the hmc452st89 & hmc452st89e are high dynamic range gaas ingap hbt 1 watt mmic power ampli ers operating from 0.4 to 2.2 ghz and packaged in industry standard sot89 packages. utilizing a minimum number of external components and a single +5v supply, the ampli er output ip3 can be optimized to +45 dbm at 0.4 ghz or +49 dbm at 2.1 ghz. the high output ip3 and pae make the hmc452st89 & hmc452st89e ideal power ampli ers for cellular/ pcs/3g and fixed wireless applications. output ip3: +49 dbm 21 db gain @ 400 mhz 9 db gain @ 2100 mhz 50% pae @ +31 dbm pout +25 dbm cdma2000 channel power @ -45 dbc acp included in the hmc-dk002 designers kit electrical speci cations, t a = +25c, vs= +5v [1] typical applications the hmc452st89 / hmc452st89e is ideal for applications requiring a high dynamic range ampli er: ? gsm, gprs & edge ? cdma & w-cdma ? catv/cable modem ? fixed wireless parameter min. typ. max. min. typ. max. min. typ. max. min. typ. max. min. typ. max. units frequency range 400 - 410 450 - 496 810 - 960 1710 - 1990 2010 - 2170 mhz gain 19 21 18 20 13.5 15.5 7 9.5 7 9 db gain variation over temperature 0.012 0.02 0.012 0.02 0.012 0.02 0.012 0.02 0.012 0.02 db / c input return loss 22 16 13 13 20 db output return loss 11 11 14 15 15 db output power for 1db compression (p1db) 27 30 27 30 27.5 30.5 28 31 28.5 31.5 dbm saturated output power (psat) 30.5 30.5 31.5 31.5 32 dbm output third order intercept (ip3) [2] 42 45 42 45 44 47 45 48 46 49 dbm noise figure 6.5 7 6.5 6.5 6.5 db supply current (icq) 510 510 510 510 510 ma [1] speci cations and data re ect hmc452st89 measured using the respective application circuits for each designated frequency band found herein. contact the hmc applications group for assistance in optimizing performance for your application. [2] two-tone input power of 0 dbm per tone, 1 mhz spacing.
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - linear & power - smt 9 9 - 125 input return loss vs. temperature @ 400 mhz output return loss vs. temperature @ 400 mhz broadband gain & return loss @ 400 mhz gain vs. temperature @ 400 mhz p1db vs. temperature @ 400 mhz psat vs. temperature @ 400 mhz -15 -10 -5 0 5 10 15 20 25 0.1 0.2 0.3 0.4 0.5 0.6 0.7 s21 s11 s22 response (db) frequency (ghz) -16 -14 -12 -10 -8 -6 -4 -2 0 0.35 0.37 0.39 0.41 0.43 0.45 +25 c +85 c -40 c return loss (db) frequency (ghz) 24 25 26 27 28 29 30 31 32 33 34 0.35 0.37 0.39 0.41 0.43 0.45 +25 c +85 c -40 c psat (dbm) frequency (ghz) -35 -30 -25 -20 -15 -10 -5 0 0.35 0.37 0.39 0.41 0.43 0.45 +25 c +85 c -40 c return loss (db) frequency (ghz) 24 25 26 27 28 29 30 31 32 33 34 0.35 0.37 0.39 0.41 0.43 0.45 +25 c +85 c -40 c p1db (dbm) frequency (ghz) 12 13 14 15 16 17 18 19 20 21 22 23 24 0.35 0.37 0.39 0.41 0.43 0.45 +25 c +85 c -40 c gain (db) frequency (ghz) hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com 9 9 - 126 amplifiers - linear & power - smt output ip3 vs. temperature @ 400 mhz noise figure vs. temperature @ 400 mhz gain, power & ip3 vs. supply voltage @ 400 mhz reverse isolation vs. temperature @ 400 mhz acpr vs. supply voltage @ 400 mhz w-cdma, 64 dpch power compression @ 400 mhz 10 15 20 25 30 35 40 45 50 4.5 4.75 5 5.25 5.5 gain p1db psat oip3 gain (db), p1db (dbm), psat (dbm), oip3 (dbm) vs (vdc) -30 -25 -20 -15 -10 -5 0 0.35 0.37 0.39 0.41 0.43 0.45 +25 c +85 c -40 c isolation (db) frequency (ghz) 0 1 2 3 4 5 6 7 8 9 10 0.35 0.37 0.39 0.41 0.43 0.45 +25 c +85 c -40 c noise figure (db) frequency (ghz) 0 5 10 15 20 25 30 35 40 45 50 55 0246810121416 pout gain pae pout (dbm), gain (db), pae (%) input power (dbm) 30 32 34 36 38 40 42 44 46 48 50 0.35 0.37 0.39 0.41 0.43 0.45 +25 c +85 c -40 c oip3 (dbm) frequency (ghz) -70 -65 -60 -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 8 10121416182022242628 acpr (dbc) channel power (dbm) w-cdma frequency: 400 mhz integration bw: 3.84 mhz 64 dpch 5v 4.5v 5.5v source acpr hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - linear & power - smt 9 9 - 127 input return loss vs. temperature @ 470 mhz output return loss vs. temperature @ 470 mhz broadband gain & return loss @ 470 mhz gain vs. temperature @ 470 mhz p1db vs. temperature @ 470 mhz psat vs. temperature @ 470 mhz -20 -15 -10 -5 0 5 10 15 20 25 0.1 0.2 0.3 0.4 0.5 0.6 0.7 s21 s11 s22 response (db) frequency (ghz) -16 -14 -12 -10 -8 -6 -4 -2 0 0.43 0.45 0.47 0.49 0.51 0.53 +25 c +85 c -40 c return loss (db) frequency (ghz) -25 -20 -15 -10 -5 0 0.43 0.45 0.47 0.49 0.51 0.53 +25 c +85 c -40 c return loss (db) frequency (ghz) 24 25 26 27 28 29 30 31 32 33 34 0.43 0.45 0.47 0.49 0.51 0.53 +25 c +85 c -40 c psat (dbm) frequency (ghz) 24 25 26 27 28 29 30 31 32 33 34 0.43 0.45 0.47 0.49 0.51 0.53 +25 c +85 c -40 c p1db (dbm) frequency (ghz) 12 13 14 15 16 17 18 19 20 21 22 23 0.43 0.45 0.47 0.49 0.51 0.53 +25 c +85 c -40 c gain (db) frequency (ghz) hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com 9 9 - 128 amplifiers - linear & power - smt output ip3 vs. temperature @ 470 mhz noise figure vs. temperature @ 470 mhz gain, power & ip3 vs. supply voltage @ 470 mhz reverse isolation vs. temperature @ 470 mhz acpr vs. supply voltage @ 470 mhz w-cdma, 64 dpch power compression @ 470 mhz 10 15 20 25 30 35 40 45 50 4.5 4.75 5 5.25 5.5 gain p1db psat oip3 gain (db), p1db (dbm), psat (dbm), oip3 (dbm) vs (vdc) 0 5 10 15 20 25 30 35 40 45 50 55 0246810121416 pout gain pae pout (dbm), gain (db), pae (%) input power (dbm) -35 -30 -25 -20 -15 -10 -5 0 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.6 +25 c +85 c -40 c isolation (db) frequency (ghz) 0 1 2 3 4 5 6 7 8 9 10 0.43 0.45 0.47 0.49 0.51 0.53 +25 c +85 c -40 c noise figure (db) frequency (ghz) 30 32 34 36 38 40 42 44 46 48 50 0.43 0.45 0.47 0.49 0.51 0.53 +25 c +85 c -40 c oip3 (dbm) frequency (ghz) -70 -65 -60 -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 8 10121416182022242628 acpr (dbc) channel power (dbm) w-cdma frequency: 470 mhz integration bw: 3.84 mhz 64 dpch 5v 4.5v 5.5v source acpr hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - linear & power - smt 9 9 - 129 input return loss vs. temperature @ 900 mhz output return loss vs. temperature @ 900 mhz broadband gain & return loss @ 900 mhz gain vs. temperature @ 900 mhz p1db vs. temperature @ 900 mhz psat vs. temperature @ 900 mhz -20 -15 -10 -5 0 5 10 15 20 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 s21 s11 s22 response (db) frequency (ghz) -20 -15 -10 -5 0 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 +25 c +85 c -40 c return loss (db) frequency (ghz) 24 25 26 27 28 29 30 31 32 33 34 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 +25 c +85 c -40 c p1db (dbm) frequency (ghz) 24 25 26 27 28 29 30 31 32 33 34 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 +25 c +85 c -40 c psat (dbm) frequency (ghz) -30 -25 -20 -15 -10 -5 0 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 +25 c +85 c -40 c return loss (db) frequency (ghz) 8 9 10 11 12 13 14 15 16 17 18 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 +25 c +85 c -40 c gain (db) frequency (ghz) hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com 9 9 - 130 amplifiers - linear & power - smt output ip3 vs. temperature @ 900 mhz noise figure vs. temperature @ 900 mhz gain, power & ip3 vs. supply voltage @ 900 mhz reverse isolation vs. temperature @ 900 mhz acpr vs. supply voltage @ 910 mhz cdma is95, 9 channels forward power compression @ 900 mhz 10 15 20 25 30 35 40 45 50 4.5 4.75 5 5.25 5.5 gain p1db psat oip3 gain (db), p1db (dbm), psat (dbm), oip3 (dbm ) vs (vdc) -30 -25 -20 -15 -10 -5 0 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 +25 c +85 c -40 c isolation (db) frequency (ghz) 0 5 10 15 20 25 30 35 40 45 50 55 4 6 8 10121416182022 pout gain pae pout (dbm), gain (db), pae (%) input power (dbm) 0 1 2 3 4 5 6 7 8 9 10 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 +25 c +85 c -40 c noise figure (db) frequency (ghz) 30 32 34 36 38 40 42 44 46 48 50 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 +25 c +85 c -40 c oip3 (dbm) frequency (ghz) -70 -65 -60 -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 8 101214161820222426 acpr (dbc) channel power (dbm) cdma is95 frequency: 910 mhz integration bw: 1.228 mhz forward link, 9 channels 5v 4.5v 5.5v source acpr hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - linear & power - smt 9 9 - 131 input return loss vs. temperature @ 1900 mhz output return loss vs. temperature @ 1900 mhz broadband gain & return loss @ 1900 mhz gain vs. temperature @ 1900 mhz p1db vs. temperature @ 1900 mhz psat vs. temperature @ 1900 mhz -25 -20 -15 -10 -5 0 5 10 15 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 s21 s11 s22 response (db) frequency (ghz) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 1.7 1.8 1.9 2 2.1 +25c +85c -40c gain (db) frequency (ghz) -20 -15 -10 -5 0 1.7 1.8 1.9 2 2.1 +25 c +85 c -40 c return loss (db) frequency (ghz) -25 -20 -15 -10 -5 0 1.7 1.8 1.9 2 2.1 +25 c +85 c -40 c return loss (db) frequency (ghz) 24 25 26 27 28 29 30 31 32 33 34 1.7 1.8 1.9 2 2.1 +25 c +85 c -40 c p1db (dbm) frequency (ghz) 24 25 26 27 28 29 30 31 32 33 34 1.7 1.8 1.9 2 2.1 +25 c +85 c -40 c psat (dbm) frequency (ghz) hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com 9 9 - 132 amplifiers - linear & power - smt output ip3 vs. temperature @ 1900 mhz noise figure vs. temperature @ 1900 mhz gain, power & ip3 vs. supply voltage @ 1900 mhz reverse isolation vs. temperature @ 1900 mhz acpr vs. supply voltage @ 1960 mhz cdma 2000, 9 channels forward power compression @ 1900 mhz 0 1 2 3 4 5 6 7 8 9 10 1.7 1.8 1.9 2 2.1 +25 c +85 c -40 c noise figure (db) frequency (ghz) -20 -15 -10 -5 0 1.7 1.8 1.9 2 2.1 +25 c +85 c -40 c isolation (db) frequency (ghz) 5 10 15 20 25 30 35 40 45 50 55 4.5 4.75 5 5.25 5.5 gain p1db psat oip3 gain (db), p1db (dbm), psat (dbm), oip3 (dbm) vs (vdc) 0 5 10 15 20 25 30 35 40 45 50 10 12 14 16 18 20 22 24 26 pout gain pae pout (dbm), gain (db), pae (%) input power (dbm) -80 -75 -70 -65 -60 -55 -50 -45 -40 -35 -30 14 16 18 20 22 24 26 28 acpr (dbc) output channel power (dbm) cdma2000 frequency: 1.96 ghz integration bw: 1.228 mhz forward link, sr1, 9 channels 5.5v 4.5v 5v 30 32 34 36 38 40 42 44 46 48 50 52 1.7 1.8 1.9 2 2.1 +25 c +85 c -40 c oip3 (dbm) frequency (ghz) hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - linear & power - smt 9 9 - 133 input return loss vs. temperature @ 2100 mhz output return loss vs. temperature @ 2100 mhz broadband gain & return loss @ 2100 mhz gain vs. temperature @ 2100 mhz p1db vs. temperature @ 2100 mhz psat vs. temperature @ 2100 mhz -30 -25 -20 -15 -10 -5 0 5 10 15 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 s21 s11 s22 response (db) frequency (ghz) 0 1 2 3 4 5 6 7 8 9 10 11 12 1.9 2 2.1 2.2 2.3 +25 c +85 c -40 c gain (db) frequency (ghz) -30 -25 -20 -15 -10 -5 0 1.9 2 2.1 2.2 2.3 +25 c +85 c -40 c return loss (db) frequency (ghz) -25 -20 -15 -10 -5 0 1.9 2 2.1 2.2 2.3 +25 c +85 c -40 c return loss (db) frequency (ghz) 24 25 26 27 28 29 30 31 32 33 34 1.9 2 2.1 2.2 2.3 +25 c +85 c -40 c p1db (dbm) frequency (ghz) 24 25 26 27 28 29 30 31 32 33 34 1.9 2 2.1 2.2 2.3 +25 c +85 c -40 c psat (dbm) frequency (ghz) hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com 9 9 - 134 amplifiers - linear & power - smt output ip3 vs. temperature @ 2100 mhz noise figure vs. temperature @ 2100 mhz gain, power & ip3 vs. supply voltage @ 2100 mhz reverse isolation vs. temperature @ 2100 mhz acpr vs. supply voltage @ 2140 mhz w-cdma, 64 dpch power compression @ 2100 mhz 30 32 34 36 38 40 42 44 46 48 50 52 1.9 2 2.1 2.2 2.3 +25 c +85 c -40 c oip3 (dbm) frequency (ghz) 0 1 2 3 4 5 6 7 8 9 10 1.9 2 2.1 2.2 2.3 +25 c +85 c -40 c noise figure (db) frequency (ghz) -20 -15 -10 -5 0 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 +25 c +85 c -40 c isolation (db) frequency (ghz) 5 10 15 20 25 30 35 40 45 50 55 4.5 4.75 5 5.25 5.5 gain p1db psat oip3 gain (db), p1db (dbm), psat (dbm), oip3 (dbm) vs (vdc) 0 5 10 15 20 25 30 35 40 45 50 10 12 14 16 18 20 22 24 26 28 pout gain pae pout (dbm), gain (db), pae (%) input power (dbm) -65 -60 -55 -50 -45 -40 -35 -30 -25 -20 12 14 16 18 20 22 24 26 28 acpr (dbc) output channel power (dbm) source acpr w-cdma frequency: 2.14 ghz integration bw: 3.84 mhz 64 dpch 5v 5.5v 4.5v hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - linear & power - smt 9 9 - 135 outline drawing absolute maximum ratings collector bias voltage (vcc) +6.0 vdc rf input power (rfin)(vs +5vdc) +31 dbm junction temperature 150 c continuous pdiss (t = 85 c) (derate 41.5 mw/c above 85 c) 2.7 w thermal resistance (junction to ground paddle) 24.1 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c esd sensitivity (hbm) class 1a power dissipation 1 1.5 2 2.5 3 0 5 10 15 20 25 power dissipation (w) input power (dbm) 1900 mhz 2100 mhz max pdiss @ +85c part number package body material lead finish msl rating package marking [3] hmc452st89 low stress injection molded plastic sn/pb solder msl1 [1] h452 xxxx hmc452st89e rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] h452 xxxx [1] max peak re ow temperature of 235 c [2] max peak re ow temperature of 260 c [3] 4-digit lot number xxxx package information electrostatic sensitive device observe handling precautions notes: 1. package body material: molding compound mp-180s or equivalent. 2. lead material: cu w/ ag spot plating. 3. lead plating: 100% matte tin. 4. dimensions are in inches [millimeters] 5. dimension does not include moldflash of 0.15mm per side. 6. dimension does not include moldflash of 0.25mm per side. 7. all ground leads must be soldered to pcb rf ground. hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com 9 9 - 136 amplifiers - linear & power - smt 400 mhz application circuit this circuit was used to specify the performance for 400-410 mhz operation. contact the hmc applications group for assistance in optimizing performance for your application. note: c2 should be placed as close to pins as possible. tl1 tl2 tl3 tl4 tl5 impedance 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm physical length 0.09 0.08 0.17 0.04 0.25 electrical length 2 2 4 1 6 pcb material: 10 mil rogers 4350, er = 3.48 recommended component values c1 12 pf c2 15 pf c3, c4 6.8 pf c5 39 pf c6 100 pf c7 2.2 f l1 47 nh l2 40 nh l3 4.3 nh l4 5.1 nh r1 5.1 ohm pin descriptions pin number function description interface schematic 1rfin this pin is dc coupled. off chip matching components are required. see application circuit herein. 3rfout rf output and dc bias input for the output ampli er stage. off chip matching components are required. see application circuit herein. 2, 4 gnd these pins & package bottom must be connected to rf/dc ground. hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - linear & power - smt 9 9 - 137 400 mhz evaluation pcb the circuit board used in this application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appro- priate heat sink. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 110409-400 [1] item description j1 - j2 pcb mount sma connector j3 2 mm dc header c1 12 pf capacitor, 0402 pkg. c2 15 pf capacitor, 0402 pkg. c3, c4 6.8 pf capacitor, 0402 pkg. c5 39 pf capacitor, 0402 pkg. c6 100 pf capacitor, 0402 pkg. c7 2.2 f capacitor, tantalum l1 47 nh inductor, 0603 pkg. l2 40 nh inductor, 0402 pkg. l3 4.3 nh inductor, 0402 pkg. l4 5.1 nh inductor, 0402 pkg. r1 5.1 ohm resistor, 0402 pkg. u1 hmc452st89 / hmc452st89e linear amp pcb [2] 110407 evaluation pcb, 10 mils [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350, er = 3.48 hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com 9 9 - 138 amplifiers - linear & power - smt 470 mhz application circuit this circuit was used to specify the performance for 450-496 mhz operation. contact the hmc applications group for assistance in optimizing performance for your application. note: c2 should be placed as close to pins as possible. tl1 tl2 tl3 tl4 tl5 impedance 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm physical length 0.09 0.08 0.17 0.04 0.25 electrical length 2.5 2 5 1 7 pcb material: 10 mil rogers 4350, er = 3.48 recommended component values c1, c2 12 pf c3 6.8 pf c4 5.6 pf c5 39 pf c6 100 pf c7 2.2 f l1 47 nh l2 40 nh l3 4.7 nh l4 3.9 nh r1 5.1 ohm hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - linear & power - smt 9 9 - 139 470 mhz evaluation pcb the circuit board used in this application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appro- priate heat sink. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 110416-470 [1] item description j1 - j2 pcb mount sma connector j3 2 mm dc header c1, c2 12 pf capacitor, 0402 pkg. c3 6.8 pf capacitor, 0402 pkg. c4 5.6 pf capacitor, 0402 pkg. c5 39 pf capacitor, 0402 pkg. c6 100 pf capacitor, 0402 pkg. c7 2.2 f capacitor, tantalum l1 47 nh inductor, 0603 pkg. l2 40 nh inductor, 0402 pkg. l3 4.7 nh inductor, 0402 pkg. l4 3.9 nh inductor, 0402 pkg. r1 5.1 ohm resistor, 0402 pkg. u1 hmc452st89 / hmc452st89e linear amp pcb [2] 110407 evaluation pcb, 10 mils [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350, er = 3.48 hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com 9 9 - 140 amplifiers - linear & power - smt 900 mhz application circuit this circuit was used to specify the performance for 810-960 mhz operation. contact the hmc applications group for assistance in optimizing performance for your application. note: c2 should be placed as close to pins as possible. tl1 tl2 tl3 impedance 50 ohm 50 ohm 50 ohm physical length 0.21 0.13 0.38 electrical length 11 7 20 pcb material: 10 mil rogers 4350, er = 3.48 recommended component values c1 27 pf c2 6.8 pf c3 2.2 pf c4 4.7 pf c5 5.6 pf c6 100 pf c7 2.2 f l1 20 nh r1 5.1 ohm hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - linear & power - smt 9 9 - 141 900 mhz evaluation pcb the circuit board used in this application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appro- priate heat sink. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 110384-900 [1] item description j1 - j2 pcb mount sma connector j3 2 mm dc header c1 27 pf capacitor, 0402 pkg. c2 6.8 pf capacitor, 0402 pkg. c3 2.2 pf capacitor, 0402 pkg. c4 4.7 pf capacitor, 0402 pkg. c5 5.6 pf capacitor, 0402 pkg. c6 100 pf capacitor, 0402 pkg. c7 2.2 f capacitor, tantalum l1 20 nh inductor, 0402 pkg. r1 5.1 ohm resistor, 0402 pkg. u1 hmc452st89 / hmc452st89e linear amp pcb [2] 110382 evaluation pcb, 10 mils [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350, er = 3.48 hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com 9 9 - 142 amplifiers - linear & power - smt 1900 mhz application circuit this circuit was used to specify the performance for 1710-1990 mhz operation. contact the hmc applications group for assistance in optimizing performance for your application. note: c2 should be placed as close to pins as possible. tl1 tl2 impedance 50 ohm 50 ohm physical length 0.04 0.10 electrical length 4 11 pcb material: 10 mil rogers 4350, er = 3.48 recommended component values c1 3 pf c2 2 pf c3 3.3 pf c4 15 pf c5 100 pf c6 2.2 f l1 10 nh l2 12 nh r1 5.1 ohm hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - linear & power - smt 9 9 - 143 1900 mhz evaluation pcb the circuit board used in this application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appro- priate heat sink. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 108712-1900 [1] item description j1 - j2 pcb mount sma connector j3 2 mm dc header c1 3 pf capacitor, 0402 pkg. c2 2 pf capacitor, 0402 pkg. c3 3.3 pf capacitor, 0402 pkg. c4 15 pf capacitor, 0402 pkg. c5 100 pf capacitor, 0402 pkg. c6 2.2 f capacitor, tantalum l1 10 nh inductor, 0402 pkg. l2 12 nh inductor, 0402 pkg. r1 5.1 ohm resistor, 0402 pkg. u1 hmc452st89 / hmc452st89e linear amp pcb [2] 108710 evaluation pcb, 10 mils [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350, er = 3.48 hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com 9 9 - 144 amplifiers - linear & power - smt 2100 mhz application circuit this circuit was used to specify the performance for 2010-2170 mhz operation. contact the hmc applications group for assistance in optimizing performance for your application. recommended component values c1 3 pf c2 2 pf c3 3.3 pf c4 15 pf c5 100 pf c6 2.2 f l1 12 nh l2 10 nh r1 5.1 ohm tl1 tl2 impedance 50 ohm 50 ohm physical length 0.04 0.04 electrical length 5 5 pcb material: 10 mil rogers 4350, er = 3.48 hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com amplifiers - linear & power - smt 9 9 - 145 2100 mhz evaluation pcb the circuit board used in this application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appro- priate heat sink. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 109824-2100 [1] item description j1 - j2 pcb mount sma connector j3 2 mm dc header c1 3 pf capacitor, 0402 pkg. c2 2 pf capacitor, 0402 pkg. c3 3.3 pf capacitor, 0402 pkg. c4 15 pf capacitor, 0402 pkg. c5 100 pf capacitor, 0402 pkg. c6 2.2 f capacitor, tantalum l1 12 nh inductor, 0402 pkg. l2 10 nh inductor, 0402 pkg. r1 5.1 ohm resistor, 0402 pkg. u1 hmc452st89 / hmc452st89e linear amp pcb [2] 109822 evaluation pcb, 10 mils [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350, er = 3.48 hmc452st89 / 452st89e v02.0710 ingap hbt 1 watt power amplifier, 0.4 - 2.2 ghz |
Price & Availability of HMC452ST8910
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |